1. Start from your desktop and
click on the Apple in the upper-left corner.
Go down to Control Panels and select PPP.
2. Enter your
695online.com Username for name,
your Password and your 695online.com Local
access number. Note: Username is
..( username@695online.com )
3. Click on the PPP
drop-down menu and select TCP/IP. (Note: The
PPP Control Panel must be the active window in order to see
the PPP menu.)
4. In the TCP/IP
window, make sure of the following 4 settings:
Connect via: is set to PPP.
Configure: is set to Using PPP
Server.
Name Server Addr: is set to 64.89.108.10
and 64.89.108.11
Additional Search Domains can be blank or have 695online.com
in it.
Close out of this window and save your changes.
5. Click on the PPP
drop-down menu and select Modem. (Note: The
PPP Control Panel must be the active window in order to see
the PPP menu.)
6. In the Modem
window, make sure of the following 2 settings:
Connect via: The correct port must be
selected. Typically this would be the Modem Port
or Internal Port, depending upon the type
of modem and how it is connected.
Modem: The correct type of modem needs
to be selected. Most likely the one that is selected already
is correct, but if you know for sure that you have a different
modem, select one from the list that most closely matches
yours.
Close out of this window and save your changes. Note: Username is ..( username@695online.com
)
7. On the PPP
Control Panel, click the Options Button.
8. On the Options
window, make sure the Connection tab is selected.
Check the box labeled "Connect automatically when starting
TCP/IP applications." Press OK. Setup
is now complete, just click connect to dial.
